Craftsman 917.28705 Manual Del Operador página 17

MAINTENANCE
BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE
SCHEDULE
EACN 8 25 50 100 SEASON STORAGE
use HOURS .OURS .OURS .OURS
Check Brake Operation _
Check Tire Pressure _ _#
T Check Operator Presence & ROS System,,
A Check for Loose Fasteners _#_ _#'
C ChecWReplace Mower Blades q_#'3
T Lubrication Chart _ _4_
0 Check Battery, Level _4
R Clean Battery and Terminals _
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts if
Check Engine Oil Level _
3hanqe Enqine Oil (with oil filter) 14_1,2
Change Engine Oil (without oil filter' q_#_'t,2
N_ Clean Air Filter _f'2
G Clean Air Screen _#4_
Inspect Muffler/Spark Arrester
N Replace Oil Filter (If equipped)
_1,2
E Clean Engine Cooling Fins if 2
Replace Spark Plug _ _#"
=_eplace Air Filter Paper Cartridge _2
_ _lace Fuel Filter ..... _ __
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
LUBRICATION CHART
@ S_ -- @ Spindle
Zerk S,,:" Zerk
@Front Wheel q @Front Wheel
Berating L.. Bearing Zerk
@Engine
)Gearshift
_ _,,- - Pivots
d)SAE 30 or 10w30 Motor Oil
@General Purpose Grease
(_Refer to Maintenance "ENGINE" Section
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
IMPORTANT." Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
17