Craftsman 316.380900 Manual Del Operador página 9

SAFETY FEATURES
• LOW-KICKBACK SAW CHAIN significantly reduces the chance of kickback and the intensity of kickback, due to specially designed
depth gauges and guard links.
The SPARK ARRESTER SCREEN retains carbon and other flammable particles over 0.023 inches (0.6ram) in size from the engine
exhaust flow. Compliance with local, state and federal laws and/or regulations governing the use of a spark arrester screen is the user's
responsibility. Refer to Spark Arrestor Note in the Safety section for additional information.
The CHAIN BRAKE LEVER / FRONT HAND GUARD helps protect the operator's left hand if it slips off the front handle while the unit is
running. The chain brake lever is also used to manually engage the chain brake.
The CHAIN BRAKE reduces the chance of injury if kickback occurs, by stopping the saw chain in milliseconds. The chain brake is
designed to engage automatically in response to kickback. The chain brake can also be activated by pushing the chain brake lever
forward, either intentionally or if the operator's hand strikes the lever during kickback.
The ON/OFF SWITCH immediately stops the engine when moved to the OFF position. The On/Off switch must be moved to the On
position to start the engine.
The THROTTLE LOCKOUT prevents accidental acceleration of the engine. The throttle control cannot be squeezed unless the throttle
lockout is depressed.
The CHAIN CATCHER reduces the chance of injury if the saw chain breaks or derails during operation. The chain catcher is designed to
intercept a whipping chain.
Engine Type ........................................................................................ Air-Cooled, 2-Cycle
Displacement ....................................................................................... 42 cc (2.56 cu. in.)
Spark Plug Gap .................................................................................... 0.025 in. (0.635 mm)
Spark Plug .......................................................................... Champion® RCJ6Y or equivalent plug
Lubrication .......................................................................................... Bar and Chain Oil
Fuel/Oil Ratio .................................................................................................. 40:1
Fuel Tank Capacity ...................................................................................... 22 oz. (650 mL)
Chain Oil Reservoir Capacity ............................................................................ 8.45 oz. (250 mL)
Approximate Unit Weight (without fuel or chain oil) ..................................................... 14 - 15 Ibs. (6.3 - 6.8 kg)
Guide Bar Length ....................................................................................... 18 in. (45.7 cm)
Saw Chain Pitch ....................................................................................... 3/8 in. (9.5 mm)
Saw Chain Gauge .................................................................................... 0.050 in. (1.3 mm)
* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any
time without notice.
REPLACEMENT PARTS
Please contact the Customer Support Department to order replacement parts.
Part # Description
753-08104 ................................................. Saw Chain (18 in./45.7 cm)
795-00278 ................................................. Guide Bar (18 in. / 45.7 cm)
753-08105 ................................................. Bar-Retaining Nuts
9