BEFORE OPERATION
AUDIO ADJUSTMENTS
DEMO
CD
To turn the unit on
Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,
CD, ME)).
Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
The PCWVERbutton is also available.
When tile unit is turned on, the disc compartment may open and
close to reset the unit.
DEMO (Demonstration)
mode
When
the AC cord
is connected,
the display
window
demonstrates the functions of the unit. When the power is turned
on, the IDEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.
Tci cancel DEMO mode
Press
i,he DEMO button. The clock display appears. (To set
the current time, see "SETTING THE CLOCK on page 21.)
To re-a.ctivate the DEMO mode, press the DEMO button again.
Illumination
guides
Whenewr the AC cord is connected or one of the function buttons
is pressed, the buttons for that operation light up or flash.
Examp!e: When the AC cord is connected, the II SET button
flashes as a guide to setting the current time.
Flash window
The window on the top of the unit lights up or flashes while the
unit is being powered on.
To turn off the light of the top window, press the
button while
pressin~l the CD button. To turn back on, repeat the above.
To turn the unit off
Press the POWER button
VOLUME
Turn the VOLUME control
on the main unit, or press the
VOLUME buttons on the remote control.
The volume level is displayed as a number from O to MAX (31).
The volume level is automatically set to 16 when the power is
turned off with the volume level set to 17 or more.
To change the Ieftiright balance
Press the MANUAL SELECT button on the remote control. L/Fl
is displayed for 2 seconds. Press the 1+4 DOWN or FDI up
button on the remote control within these 2 seconds.
The DOLBY PRO LOGIC front speakers level is also changed.
(See page 17)
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound
It also enriches the Karaoke function to make your voice souncl
clear and pleasant.
Press the BBE button.
Each time it is pressed, the level changes.
Select one c)f the
three levels, or the off position to suit your preference.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of Iow-frequent!/
sound.
Press the T-BASS button.
Each time it is pressed, the level changes.
Select one of the
three levels, or the off position to suit your preference.
m
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is originally
emphasized. In this case, cancel the T-BASS system.
ENGLISH 6