Autoadapt Turny Low Vehicle Manual De Instalación página 31

3
4
5
6
7
Program movement path, swivel out
Switch between screen 8 and 9 to program this path.
Lengthwise/swivel
8
Stepless Swivel
Out
Forwards
Backwards
9
10
Confirm the rear starting point.
Press 4 for Backwards until screen 4 comes up.
Correct exit position.
Use 2 and 4, Forwards and Backwards, to run to the desired front end position.
(When screen 5 comes up it is possible to save the end position)
Press 3 to Save and continue programming.
(Screen 6 comes up)
Use 2 and 4,
(When screen 7 comes up it is possible to save the end position)
Tips!
The rear end position for comfort is the starting point for Swivel Out below. Mark
this starting position with a piece of tape. This marking can be useful in the event of
any editing of the Swivel Out path.
Press 3 to Save and continue programming.
The figure in the left corner shows how many degrees the seat is swivelled out.
Press 1 to select in the main menu at the top.
Press 2 to activate selected direction (displayed as a large symbol to the right of the
screen).
Press 3 for "Sequentially Swivel Out" (+1° at a time).
Press 4 to select direction Gradually Swivel Out, Forwards or Backwards.
"Gradually swivel out" is a combined swivel and forward movement. We recommend
first using this swivel first to achieve a gentle, smooth movement path.
Extend
Press 1 or 3 to select the main menu at the top.
Press 2 for In.
Press 4 for Out.
Exit
Press 1 to select in the main menu at the top.
Press 3 to save and exit from the programming mode. Turny Low Vehicle is now back
in normal operating mode.
and to run to the desired rear end position.
Forwards Backwards,
Getting seated Turny Low Vehicle
(Screen 8 comes up)
31
EN