Publicidad
Idiomas disponibles
Idiomas disponibles
DO NOT get the power cord caught under the nozzie when using the vacuum or
attachments as it can be damaged by the agitator as it revolves.
ATTACHMENTS
tr
Dusti
'
o
P mg
1
Brush —> үң
Crevice
Raised
Y
Too!
'ab
501
Hose
The attachments should be conveniently positioned
on the side of the cleaner for easy access. Assemble
the hose and attachments to the cleaner as follows:
Place the hose on the hose holder in front of the handle.
Attach the wand to the hose by aligning the two (2)
raised tabs on the wand with the "J" slots in the hose.
After guiding the tabs along the grooves, twist to lock
in place.
>
Place the wand in the middle slot of the tool holder,
twisting and pushing down over the short hose to
assure a good connection.
Store the dusting brush in the front of the too! holder.
T
Sp,
SAT
NM
yo
Place the crevice tool into the rear slot of the tool
holder.
Refer to the illustration in the PARTS IDENTIFICATION
section for correct attachment storage.
S
oe
Publicidad
