Descargar Imprimir esta página

Fagor 3WCI-4540N Manual De Instrucciones página 41

Publicidad

Idiomas disponibles

Idiomas disponibles

Indoor lighting
Press and hold the light button for 5 seconds to turn the light on or off. Activation is
indicated a dot on the display.
Settings mode
Some settings are available depending on the mode.
Set the temperature unit °F or °C.
Touch and hold
firm. Touch
for 5 seconds to exit.
Set the display backlight intensity
Touch and hold
display backlight intensity. The default setting is d1. Touch
5 seconds to exit.
Set the appliance interior lighting intensity.
Touch and hold
interior lighting intensity. The default setting is L3 Touch
seconds to exit.
Set sounds.
Touch and hold
the sounds. The default setting is S1. The possible settings are as follows:
S0: Touch sensor sound ON / Audio alarm OFF
S1: Touch sensor sound ON / Audio alarm ON
S2: Touch sensor sound OFF / Audio alarm OFF
S3: Touch sensor sound OFF / Audio alarm ON
Touch
to confirm. Touch
Internal Humidity
According to the model wine coolers are equipped with a humidity system to main-
tain optimal humidity within the wine cooler. Fill the humidity reservoir approximately
3/4 full with water. Place the reservoir on the runners on the top shelf as shown in
fig. 2. Ensure it is located correctly to prevent water spillage. Check the water level
regularly and refill if required.
Temperature display
The temperature display will show the current internal temperature.
The display flashes:
When a different temperature is being set
If the internal temperature is +/- 5˚ away from the set temperature.
This serves as a warning to prevent damage to the contents of the appliance should
the temperature be too high.
Silent Mode
Touch and hold
set the silent mode (F0). When the required temperature is reached, the appliance
operates without the fan. This is the default mode of the wine cooler.
for 5 seconds, then use
for 5 seconds, then touch
for 5 seconds, then touch
for 5 seconds, then touch
for 5 seconds to exit.
for 5 seconds, then touch
and
to set the unit. Touch
once. Now use
to confirm. Touch
twice. Now use
to confirm. Touch
four times. Now use
three times. Now use
to con-
and
to set the
for
and
to set the
for 5
and
to set
an
to
41

Publicidad

loading

Este manual también es adecuado para:

3wci-6040n3wci-6040n.13wci-8840n