Publicidad
Idiomas disponibles
Idiomas disponibles
DE F LA TI NG AND PA CK ING AWAY
FO R R AN GER
● Before deflating the kayak, please remove the central fin and ensure it is clean
and free of sand and debris. Hose down if necessary to prevent mildew build-up
in storage. Do not use harsh chemicals for cleaning. Most dirt can be removed
with mild soap and water.
● Deflate each valve on the Kayak by first removing the valve cap. Next, you can
release some pressure by slightly pushing on the push-pin. TIP: Don't face
directly over the valve when releasing the initial blast of air.
● To fully deflate the kayak, please push firmly on the push-pin and twist the knob
in any direction to lock into place. Your kayak will now rapidly deflate.
● To ensure full deflation, you can carefully kneel and crawl, or sit over parts of the
kayak to force the remaining air out. For best results you can use the deflate option on the pump to remove
any last air pockets. to stop air from being pulled back in when removing the hose, quickly twist the valve pin
to pop it back up fully, this will close the valve. Once fully deflated, please re-attach the valve caps.
● Remove the base from inside the kayak and roll this up. Figure 1.
● Fold the kayak in half and roll around the base insert tightly. Roll from the nose down. Figure 2. Once rolled
up, fix the buckle strap around the outside and tighten for storage.
● Please pack and store the Kayak in the backpack provided in a cool dry place and away from direct sunlight.
Publicidad
