Publicidad
Idiomas disponibles
Idiomas disponibles
S C O U T
I N F L A T I O N P R O C E S S
WARNING: Please only use the pump provided, or a pump that is recommended for your Kayak.
DO NOT use an air compressor as you will risk overinflating the board and damaging it beyond
repair. Your warranty will be void in the event of damage caused by over-inflation.
●
Unpack and unroll your Bluefin Kayak on a smooth, clean, flat surface.
●
Connect the air tap on your pump to the inflation valve on your Kayak.
Unscrew the valve cap and firmly push the air tap into the hole for a
friction fit. Figure 1
●
Before you begin to pump, please consult the recommended PSI on
the valve(s) of your Kayak and inflate to the appropriate value. DO
NOT over-inflate your Kayak.
●
The PSI may not register on your pump until you reach at least 1 PSI -
keep pumping!
●
Once the desired air pressure has been reached, please safely
disconnect the pump hose from the valve and screw the valve cap
back on.
Publicidad
