T R O U B L E S H O O T I N G
Fault
Inspection
The fin won't fit
The fin box has warped
into the fin box.
and the fin won't slot
back in.
I keep losing my
Check the fin box for
fin. Why is it so
damage and reassess
heavy?
the fin attachment.
Water or
Immediate action is
moisture has
required.
entered my
Kayak.
Solution
Heat up the plastic on the fin box with a
hair-dryer, which should allow you to squeeze
the fin back in. Leave the fin in the fin box for a
few hours so that the mould resets.
If the problem persists, please contact us at
Kayak-support@bluefintrading.co.uk. Additional
resources may be found at
www.bluefinsupboards.com/info-zone/mainten
ance-repair/
The weighted fin enhances handling and
manoeuvrability, especially in more testing
conditions. Please securely attach your fin
system to prevent loss or damage.
For a replacement fin, please visit
www.bluefinsupboards.com
Remove the valve from the kayak entirely using
the valve tool provided. Pump air through the
vacant hole repeatedly for 20 minutes. Once
complete, lay the board flat in a cool, dry area
with plenty of ventilation for at least 24 hours.
If the problem persists, please contact us at
Kayak-support@bluefintrading.co.uk. Additional
resources may be found at
www.bluefinsupboards.com/info-zone/mainten
ance-repair/