Bissell ZING 6489 Serie Guia Del Usuario página 13

I
g
Vacuum cleaner won't run
Possible causes
WARNING:
To reduce the risk of electric shock,
turn power OFF and disconnect plug
from electrical outlet before performing
maintenance or troubleshooting.
Remedies
1. Vacuum cleaner isnot p lugged in
2. Power button isnot p ressed down
Vacuum cleaner won't pick up or low
Possible causes
1. Check electrical plug
2. Press power button down
suction
Remedies
1. Tools, hose and/or extension wands are blocked
2. Filters are dirty
3. Dirt cup is full
4. Hose connector not securely attached tosuction inlet
5. Crack orhole i nhose
6. Air flow regulator isset t oopen o r
minimum setting
7. Clog i nthedirtcup
Visible dust escaping from vacuum
Possible causes
1. Remove each part a nd check forblockages
2. Check and clean orreplace all f ilters
3. Empty dirt c up
4. Make s ure hose c onnector islocked into
suclion inlet
5. Check hose a ndreplace if needed
6. Change toclosed ormaximum setting
Clear dog from dirt cup following
instructions on page 12
Remedies
1. Dirt c upis full 1. Empty dirt c up
2. Filters m issing orinstalled incorre_y 2. Check allfilters forcorrect installation
3. Filters are dirty 3. Check and clean orreplace all f ilters
4. Hose i sblocked 4. Remove hose a nd check forblockages
5. Hose c onnector not s ecurely attached tosuction inlet 5. Make s ure hose c onnector islocked into
suclion inlet
6. Crack orhole i nhose 6. Check hose a ndreplace if needed
7. Dirt c upisopen 7. Follow Emptying thedirtcup instruclions step(s) (1-5)
on page 8
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do nat return this product to the stare. I
For any questions or concerns, BISSELLis happy to be of
service. Contact us directly at 1-800-2,37-7691.
13
www. b i s se II. co m _, 800.237.7691