Bissell ZING 6489 Serie Guia Del Usuario página 11

ntenance and care
Replacin_l the post-motor filter
The post-motor filter assists in
the filtration process to return
cleaner air to the room. Use only
BISSELL replacement filters in
your Zing Canister.
1. Unplug the vacuum from
electrical outlet.
2. Remove the filter door (located on the
back of the vacuum) by pushing down
on the tab and pulling out and away
from the vacuum.
.
The post-motor filter can be hand
washed in cold water with a mild
detergent. Rinse well and air dry
completely before placing back into
the vacuum.
.
Replace the filter door by placing the
tabs on the bottom of the filter door
into the notches on the bottom of the
post-motor filter compartment and
pushing the tab forward back into
the vacuum to lock into place.
WARNING:
Do not operate cleaner with
damp or wet filters or
without all filters in place.
11
www. b i s se II. co m ;_, 800.237.7691