Care And Cleaning - George Foreman GV6S Manual De Uso Y Cuidado

Care and Cleaning

CLEANING
Caution: To avoid accidental burns, allow Contact Roaster to cool thoroughly
before cleaning.
1. Before cleaning, unplug from wall outlet and allow to cool.
Important: Heat continues to be ON until power ON/OFF button
appliance is unplugged.
2. Place drip tray under front of roaster. Use plastic spatula to scrape off any
excess fat and food particles left on cooking plates.
3. Use a warm, soapy sponge to wipe cooking plates clean and allow any greasy
runoff to drip into drip tray; rinse sponge and wipe again to remove any soapy
residue. Dry thoroughly with an absorbent paper towel.
4. Empty drip tray and wash in warm, soapy water or place in top rack of
dishwasher. Dry thoroughly with a paper towel.
5. To remove stubborn buildup, use a nylon or nonmetallic scrubbing pad to clean
interior of your roaster.
Important: Do not use metallic scrubbing pads, steel wool or any abrasive
cleaners to clean any part of Contact Roaster; use only nylon or nonmetallic
scrubbing pads.
6. To clean roaster exterior, wipe with a warm, damp sponge and dry with a soft,
dry cloth.
Important: Do not immerse body of roaster in water or any other liquid.
7. Any servicing requiring disassembly other than the above cleaning must be
performed by a qualified electrician.
Caution: Make sure to hold roaster lid while cleaning to prevent accidental
closing and injury.
STORAGE
Always make sure roaster is clean and dry before storing. The multi-purpose
baking pan and drip tray can be stored inside the roaster. Wind the cord around
the cord wrap at the back of the roaster.
8
is pressed or
( )