Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
25
OPTION
BUTTONS
Your washing
machine
features
several additional
cycle options
that customize
cycles to meet your indi-
vidual needs. To use these options,
select the desired
option AFTER selecting
the desired
cycle.
After selecting
the desired
cycle and settings,
press
the cycle option
button(s)
for the option(s) you would
like to add. The button
will light when that option
is
selected.
If the selected
option
is not allowed
for the
selected
cycle, the chime will sound twice
to alert
you, and the LED will not illuminate.
NOTE:
• To protect your garments,
not every option is avail-
able with every cycle.
• If the START/PAUSE
button
is not pressed
within
five minutes
to start the cycle, the control will shut
off and all settings
will be lost.
COLD
WASH
TM
This option saves energy
by using cooler water
while
increasing
the wash and rinse times to maintain
wash
performance.
NOTE:
• The Stain Care
TM
feature
cannot be selected
with
the Cold Wash
TM
option.
• Wash time will increase
up to 30 minutes
with the
Cold Wash
TM
option.
• For best wash results,
only wash small loads (less
than 8 pounds)
with the Cold Wash
TM
option.
DELAY
WASH
Once you have selected
the cycle and other settings,
press this button
to delay the start of the wash cycle.
Each press of the button
increases
the delay time by
one hour, for up to 19 hours. Once the desired
delay
time is set, press the START/PAUSE
button
to start
the delay time.
NOTE: If the START/PAUSE
button
is not pressed
to
begin the delay time, the washer
will automatically
shut off after five minutes
and all cycle settings
will
be lost.
CUSTOM
PROGRAM
(PGM)
Custom
Program allows you to store a customized
wash cycle for future use. It allows you to save your
favorite
temperature,
spin speed, soil level, and other
options
for a cycle, and then recall them at the touch
of a button.
To create a Custom
Program:
1. Press the POWER
button to turn on the washer.
2. Press the cycle button
repeatedly
until the desired
cycle is selected
3. Press the cycle modifier
button
to change the de-
sired setting.
4. Press the cycle option
button
to add the desired
options.
5. Press and hold the CUSTOM
PROGRAM
button
for
three seconds.
TO RECALL
A CUSTOM
PROGRAM:
1. Press the POWER
button
to turn on the washer.
2. Briefly press the CUSTOM
PGM button.
The stored
settings
will display.
3. Press the START/PAUSE
button to start the cycle.
(Pressing any other button
at this time will cancel
the custom
program.)
NOTE: You may only save one custom
program
at a
time. Pressing
and holding the CUSTOM
PROGRAM
button
will overwrite
any previously
saved custom
program.
TURBO
WASH
TM
Adding the Turbo Wash
TM
option reduces
the cycle
time while still providing
similar wash performance
to
the same cycle without
Turbo Wash.
NOTE:
• The Turbo Wash
TM
option cannot be used with all
cycles.
• Turbo Wash
TM
defaults
to ON for COTTON/NOR-
MAL, HEAVY DUTY, and SPEED WASH cycles.
FABRIC
SOFTENER
The fabric softener
is dispensed
in the final rinse.
Select the FABRIC SOFTENER
button
if you are using
fabric softener.
EXTRA
RINSE
This option will add an extra rinse to the selected
cycle. Use this option to help ensure the removal
of
detergent
or bleach
residue from fabrics.
Liquid fabric
softener,
if used, is always dispensed
in the final rinse.
NOTE: You cannot select the Extra Rinse option with
the Spin Only option.
Publicidad
