Descargar Imprimir esta página

Craftsman 917.25024 Manual De Instrucciones página 12

Ocultar thumbs Ver también para 917.25024:

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECK
TIRE PRESSURE
The tires on your tractor were over-inflated
atthe factory for shipping purposes. Correct
tire pressure is important for best cutting
performance.
- Reducetire pressure to PSI shown on tires.
CHECK
DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown lot replacing
motion and mower blade drive belts in the
Service and Adiustments section of this man-
ual. Verify that the belts are routed correctly.
CHECK
BRAKE SYSTEM
After you learn how to operate your tractor,
checkto see that the brake is operating prop-
erly. See"TO CHECK BRAKE" intheService
and Adjustments section of this manual.
t_CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance
and satisfaction
from this
Quality Product.
Please review the following checklist:
All assembly instructions have been
completed.
No remaining loose paris in carton.
J" Battery
is properly
prepared
and
charged.
Seat is adjusted comfortably and tight-
ened securely,
J
All tires are properly inflated. (For ship-
ping purposes, the tires were ovednflated
at the factory).
Be sure mower deck is properly leveled
side-to-side/tront-to-rear for best cutting
results. (Tires must be properly inflated
for leveling).
Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
v z Check wiring. See that all connections
are still secure and wires are properly
clamped.
While learning howto use yourtractor, pay ex-
tra attention to the following importantitems:
Engine oil is at proper level.
J' Fue[tankis filledwithfresh, clean, regular
unleaded gasoline.
Become familiar with all controls, their
location and function.
Operate them
before you start the engine.
J" Besure brake system is insafe operating
condition.
_
Be sure Operator Presence System and
Reverse Operation System (ROS) are
working properly (SeetheOperation and
Maintenance sections in this manual).
12

Publicidad

loading