Publicidad
Idiomas disponibles
Idiomas disponibles
English
Safety
Read these instructions carefully and retain for
future reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
Switch off and unplug before fitting or removing
tools/attachments, after use and before cleaning.
Keep your fingers away from moving parts and
fitted attachments.
Never leave the machine on unattended.
Never use a damaged machine. Get it checked or
repaired: see 'Service and customer care'.
Never let the cord hang down where a child could
grab it.
Never operate the Stand Mixer with the head in the
raised position.
Never let the power unit, cord or plug get wet.
Never use an unauthorised attachment or both
outlets at the same time
Never exceed the maximum quantities and speeds
stated in the Recommended Usage Chart.
When using an attachment, read the safety
instructions that come with it.
Take care when removing bowl tools after extended
use as they may get hot.
Take care when lifting this appliance as it is heavy.
Ensure the head is locked and that the bowl, tools,
outlet cover and cord are secure before lifting.
When moving the appliance always pick up by the
pedestal base and mixer head. Do not lift or carry
the appliance by the bowl handle.
Do not move or raise the mixer head with an
attachment fitted as the Stand mixer could become
unstable.
Do not operate your appliance near the edge or
overhanging the work surface or apply force to an
attachment when fitted, as this may cause the unit
to become unstable and tip over, which may result
in injury.
2
Publicidad
