LaserLiner LaserCube Manual página 6

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU which is covered by the
Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers – may
apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating fields.
1
Inserting batteries
Open the battery compartment
and insert batteries according
to the symbols. Be sure to pay
attention to polarity.
1
2
2 On-floor applications
Place the device on the floor and switch on.
06
EN
4
3
A
!
B
1
Laser output windows
2 Battery compartment
(bottom)
3 ON / OFF switch
4 Vials
The vials are only adjusted
for the four A bearing
surfaces (see image). When
placed on the B surfaces,
the device cannot be used
as a spirit level.
–