EN-4
DISPLAY
1
2
3
Item
Description
1
Battery symbol
2
Negative symbol
3
Stable weight symbol
4.2 Principal Functions
Zeroing:
Weighing:
4.3 Application Modes
Dynamic Weighing: Use this application to weigh an unstable load, such as a moving
animal.
Weight Alert: Use this application to determine if the weight of the item is within the
target limit. And the Weigh Alert
For details, please consult the instruction manual.
5. MAINTENANCE
5.1 Cleaning
For Courier 1000, the housing may be cleaned with a cloth dampened with a mild
detergent if necessary.
WARNING: Electric Shock Hazard. Disconnect the equipment from the
power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive
cleaning agents.
5.2 Service Information
For troubleshooting common problems, download the user manual from www.Ohaus.com.
If the issue persists, please visit our website for available support and service centers at
https://www.ohaus.com/en-us/support/service-centers.
Figure 4-1 Display
Item
4
5
6
Press
Zero
to zero the scale.
First press Zero to set the display to zero. Place the load on the
pan. The display indicates the gross weight.
TM
is only available on the i-C12P75 model.
Description
Pound symbol
Dynamic Weighing mode symbol
Kilogram symbols
4
5
6