Descargar Imprimir esta página

Mark SUPERLED BAT 144 IP WI Manual Del Usuario página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

USING W-DMX MODE
Transmitters
Pressing the button momentarily will connect to all unconnected receivers in the coverage area.
Pressing the button for more that 3 seconds will disconnect all receivers in the coverage area.
Receivers
Pressing the button for more than 3 seconds will disconnect the device with the transmitter.
NOTE:
The colour of the LED will indicate the group as shown in TABLE 2.
The receiver will not connect to a new transmitter unless it is disconnected first.
TABLE 2
PROTOCOL
ACTION
White
Red
W-DMX
Red fast flash
Receiver
Green fast flash
Green slow flash
Green
Red
Blue fast flash
W-DMX
Transmitter
Blue slow flash
Blue
DESCRIPTION
No connection
Deleting connection
Connection lost
Connecting to transmitter
Connected by not DMX signal
Connected with DMX signal
Deleting all receivers
Connecting with the receivers
No DMX input
Transmitting ok
11

Publicidad

loading