Lenco KCD-011kids Manual De Usuario página 8

Bluetooth Mode
You must follow several steps to connect your mobile phone:
Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
1.
2. Rotate POWER knob to turn on the unit, then press the MODE button repeatedly until the "BT." indicator
appears on the display. It will be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named "Lenco KCD-011kids".
Select "Lenco KCD-011kids" on your phone and it present the option to connect or not. Please connect
4.
to it using the password "0000" (if any). When you are successfully connected, the Bluetooth indicator
"BT" appears on the display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone have been
paired once, they will automatically connect when the unit is on and Bluetooth is activated on the phone. The next
time you power on, the unit will automatically connect to the most recently connected mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the PLAY/PAUSE button to play. Press the F.SKIP or B.SKIP button to
skip the tracks backwards or forwards. To pause or resume play, press PLAY/PAUSE the button again. Press and
hold the button PLAY/PAUSE to disconnect all paired Bluetooth devices.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if it
becomes dirty.
Rotate the POWER button to turn on the unit.
1.
2. Press the MODE button repeatedly to select the CD function.
3. Open the CD door and put a CD on the tray (with printed label side facing up).
4. Close the CD DOOR and the disc will rotate for a few seconds, then play the 1st track automatically.
To temporarily stop playback, press the PLAY/PAUSE button, and to resume playback, press it again.
5.
Press the STOP button to stop play.
6.
BACKWARD/FORWARD
The F.SKIP and B.SKIP Buttons used to jump to a different track number or hold to scan disc tracks at high
1.
speed.
2. Press the B.SKIP button once to skip to the beginning of the current track. Press it two or more times to hear
previous tracks on the disc.
Press the F.SKIP button to start playing the next tracks on the disc.
3.
4. Press and hold the B.SKIP button; The current track will be rewarded towards the start of the track track(s);
When the desired track section is found, release the button and normal play will resume.
Press and hold the F.SKIP button, the current track will be sped up towards the next track(s).
5.
When the desired track section is found, release the selected button and normal playback will resume.
REPEAT FUNCTION
The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
To select the single-track repeat function, choose the track that you want to repeat, then press REPEAT
button once to activate the single track repeat. Press PLAY/PAUSE button to play the track. To select the "All
Tracks Repeat" function, press REPEAT button twice to activate the "All Tracks Repeat" function. Press
PLAY/PAUSE button to start the track.
PROGRAM FUNCTION
The Program feature may be used to program up to 20 tracks to play in a selected order.
1. Press STOP button to show all tracks number, such as"20"
2. Press PROGRAM button once, the LED DISPLAY showing "01",
3. Press F.SKIP (FORWARD SKIP) or B.SKIP (BACKWARD SKIP) button to select a track.
4. Press PROGRAM button again to store the selected track number.
5. Repeat steps 2 and 3 above to program other tracks.
6. Press PLAY/PAUSE button to start programmed playback.
8