BABYTREND Smart Steps WK03 B Serie Manual De Instrucciones página 5

ASSEMBLY
TABLE LEGS
1 • Insert each leg into the
base until it is securely
attached (Fig. 1a).
• Insert the tabletop into
all 3 legs (Fig. 1b).
NOTE: Ensure that
each pin clicks into
position and secure all
legs into place.
• Be sure to lineup the
tabletop tray logo with
the base that has the
imprinted "FRONT"
lettering (Fig. 1c).
"Click"
Fig. 1b
7
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 1a
Fig. 1c
SWIVEL SEAT MODE
2
• Push the tabs inward to
detach the seat from the
top plate before assembling
(Fig. 2a).
• Align the seat to the center
opening and press it down
firmly. The seat must
completely click into to the
tabletop (Fig. 2b).
NOTE: Rotate the seat
to ensure the swivel function
is active.
• To adjust the seat strap,
push up on the strap to
tighten. Flip the clip to
loosen the seat (Fig. 2c).
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 2a
Fig. 2b
Fig. 2c
8