Publicidad
Idiomas disponibles
Idiomas disponibles
UNFOLD
DISASSEMBLING THE ACTIVTY CENTER
Ensure all the toys are removed from the tabletop
before disassembling.
11
• SEAT REMOVAL:
To remove the seat, use
the edge of the seat to
lift it off the tabletop
(Fig. 11a).
• Ensure all the toys are
removed, and the seat.
• TABLETOP:
To remove, push the 3
pins located on each
table leg (Fig. 11b).
Repeat the process for
the other table legs.
• 3 TABLE LEGS:
To remove, locate
the tab underneath
the base. Pull the
tab towards you and
remove the leg
(Fig. 11c). Repeat
for the other sides.
15
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
lift from edge
Fig. 11a
Fig. 11b
Fig. 11c
MAINTENANCE
SEAT FABRIC
DO NOT MACHINE WASH. For
metal and plastic parts, use only
.
lukewarm water and mild soap
12
• To remove the seat fabric for
maintenance, pull out all the
plates from the tab on the seat
base (Fig. 12a).
•
To reattach the fabric, insert the
warning label side towards the
backrest of the seat base. Fold
the fabric over and insert the
rear center plate into the tab.
Continue to connect all plates
around the seat base tabs.
All plates and tabs must be
secured before use (Fig. 12b).
STOPPER REPLACEMENT
For replacement, if lost or damaged ONLY.
The Stoppers are there
•
13
for Stair Safety reasons,
do NOT remove the
stoppers unless for
replacement purposes.
• REMOVAL: To remove,
pull out the stopper
(Fig. 13a).
• REATTACH: Push the
stopper into the housing
completely (Fig. 13b).
Ensure to apply enough
pressure when inserting
the stoppers.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 12a
Fig. 12b
Fig. 13a
16
Fig. 13b
Publicidad
