Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
BATTERY INSTRUCTION
3
• The
Lion Toy
requires
batteries.
Reference (Fig. 3) for
battery installation. Unscrew
the battery door and pull
outward. Install batteries as
shown. Secure battery door
with screw.
Battery Door
and Screw
WARNING:
• Requires two AAA (LR03) batteries (not included) for toy operation.
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and used batteries are not to be
mixed. Batteries need to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not be short-circuited.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
HEIGHT POSITIONS
IMPORTANT:
Never change the
height when the baby is in the walker.
4
•
To adjust the height
position(s), push the
button on the table leg
to the desired position.
Repeat for the other
sides.
NOTE: Each leg has 3
adjustable height levels.
ALWAYS adjust all 3 legs
to the same level (Fig. 4).
9
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
2 AAA
Fig. 3
Fig. 4
TOY ATTACHMENT
5
•
Place toys in this order
as shown. Toys must be
properly attached before
use (Fig. 5a).
NOTE: ONLY the
flower, lion, and mirror
stand-alone toys are
interchangeable.
•
All toys must be aligned
with their single or double
tab housings on the activity
center tray (Fig. 5b). Set the
toy base in alignment with
the tabletop fitting. From
underneath the tabletop
push the lock up and turn it
left to lock.
• Use the diagram below
(Fig. 5c) to lock the toys
onto the tabletop. (1) Push
the tab up and rotate it left
to lock. (2) Rotate the tab
right to release the toy. (3)
Always put the small tab
lock back into the tabletop
when not in use.
Align
1
2
Fig. 5c
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 5a
Fig. 5b
Align
3
10
Publicidad
