ASSEMBLY
FRONT WHEELS
This product converts into (3) Modes: Walker Mode, Air Bouncer
Activity Center Mode, and Stationary Activity Center Mode. See
pages 13-14 to use the different modes.
6
• Locate the two front
wheels under the
base shown on the
diagram (Fig. 6a).
• Pull the wheel out
from the base, and
straighten the wheel
(Fig. 6b).
• Push the wheel
upward until it clicks
into the base (Fig. 6c).
Repeat for the other
side.
•
HIDE WHEELS:
To
tuck away the wheels,
pull the wheel out
from the base and
reverse the steps
above. Repeat for the
other side.
11
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Front Wheels
Rear Wheels
Fig. 6a
Fig. 6b
"Click"
Fig. 6c
REAR WHEELS
7
•
Locate the two rear
wheels on the diagram
(Fig. 6a).
• Pull the wheel out from
the base, and straighten
the wheel (Fig. 7a).
• Push the wheel upward
until it clicks into the base
(Fig. 7b). Repeat for the
other side.
•
HIDE WHEELS:
To tuck
away the wheels, pull the
wheel out from the base
and reverse the steps
above. Repeat for the
other side.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 7a
"Click"
Fig. 7b
12