Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly step (4)
Align the #9-bracket with the hole of the
#7-pallet support tube and use the #13-5
Allen key to lock the#22-hexagonal flathead
screw M8*15 clockwise. Loosen the#8-branch
elasticity knob on the supporttube and insert
the #7-plate support tubeinto the #2- support
tube. After adiustingto the proper position, tighten
the flexspring knob to fix it.
ssembly step(5)
After disassembling the #6-foam tube,
insertthe #2-hook leg and the #3-hook leg.
and insert the foam and plug at both endsas
shown.
Assembly step (6)
The #8-restricted rebar is disassembled
As shown in the figure, different hole positionscan
8
be inserted to adiust the position of thehook leg
and fit the ergonomic dimensions.
-21-
Publicidad
