MAINTENANCE
Cleaning and Care
Empty the water container
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
!
Warning!
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the " " will light on the
display. After the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Clean the filters
This dryer has a primary door lint filter.
Make sure you clean the door filter after each cycle.
Note!
•
To ensure the double-layer filter can
be closed smoothly , the arrows at both
ends need to be aligned, and the middle
slot and the rib need to be aligned.
Clean the
door
1. Open the door.
2. Take out the door filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in running water.
4. Dry the door filter thoroughly before
installing it back.
Note!
• Take notice of the correct orientation before to insert the door filter.
filter
21
Door Filter