Vornado PIVOT5-EU Guia Del Propietario página 6

CONTROLS
POWER ON/OFF
Select High (III),
Medium (II), Low (I) fan
speed or power off (O)
10 English
CLEANING
GRILL REMOVAL
Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grill.
1. Remove the 3 screws located in between
the ribs of the inlet grill at roughly 2, 5
and 9 o'clock positions. Screw locations
’
are also indicated with an arrow ( ) on
the circulator.
2. Dust or wash Front Grill with a mild
Screw
dishwashing soap. Do not place grill in the
dishwasher. The excessive heat can distort
the plastic.
3. To reattach - position the Front Grill so the
Vornado logo in the center of the Front
Grill is straight. Replace all the screws.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grill and Air Inlets.
Note: The motor is permanently lubricated
and requires no oiling.
Screw
Screw
11
English