GE 16 Serie Manual Del Propietario E Instalación página 18

Installation Instructions
B REVERSING THE DOOR SWING
(CONT.)
[] REMOVE THE FRESH FOOD
DOOR
3.1 Tape the door shut with masking tape.
[] REMOVE THE FRESH FOOD
DOOR (CONT.)
3.4 Set the door outside-ui ) on a non-scratching
S/llS[ilce,
3.2 Using a 5/16" hex-head socket screwdriver and
a 5/16" open-end wrench, remove the two
screws holding the center hinge (and the shim
glued to it) to the cabinet. I,ift the center hinge
to free its pin ti'om the socket in the top of the
doo_, and set hinge and screws aside. Be careful
not to lose the center hinge spacer mad washer.
3.3 Rein(we the tape and tilt the door away fl'om the
cabinet. I,ifl the door fi'om the pin in the bottom
hinge bracket. (If the plastic washer sticks to the
door bottom, put it back on the hinge.)
3.5 Transfer the two screws fl'om the opposite side of
the cabinet to the screw holes _ _cated b_ the center
hin,,e I'eI/lO_,al.
3.6 Transfer the washer (if your model has one) to the
opposite side.
3.7 Take one of the scre_vs removed in step 2 and start
it in the outem_ost screw hole on the opposite side.
Do not drive it all the way down--leave enough
space trader the screw head tot thickness of shim
and bracket.
IJ
0
18