höfats SPIN 900 Instrucciones De Uso página 21

LIGHTING THE FIRE FIGURE C
Optional: Use Bio-Burner with Eco-Ring (Figure C1)
• If you put the Eco-Ring on the Bio-Burner after filling, the flame is
reduced a little and you save liquid fuel! This also means your SPIN
will burn for longer.
Bio-Burner ignition
• Light the Bio-Burner at the mesh with a stick lighter (Figure C2).
EXTINGUISHING THE BIO BURNER FIGURE D
• To extinguish the Bio-Burner, grasp the extinguishing cover by the
wire (Figure D1).
• Then lower the cover into the glass cylinder until it rests on the Bio-
Burner (Figure D2).
• Wait for the flame to go out and the SPIN to cool before re-igniting or
moving the Bio-Burner in the SPIN.
EN
CAUTION!
touch the Eco-Ring when it has cooled down and not after
a burning process.
– Risk of burns from hot surfaces! Only