Konig & Meyer 29670 Instrucciones De Montaje página 8

Maintenance, cleaning and repair
u Maintenance: Regularly check if the screw connections are tight.
u Cleaning: Use a slightly damp cloth to clean the speaker wall mount. Do not use chlorinated
u
or abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Immediately repair any damage that occurs and stop using the speaker wall mount.
u
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u
are missing,contact the manufacturer at www.k-m.de. You can use the item number printed on
u
the model plate to access a replacement parts sheet so you can order the missing or defective
u
parts.
Fault and troubleshooting
Fault/cause
Components of the mount
wobble or have play
Speaker box wobbles on boom
Storage, disposal
Store the speaker wall mount in a dry place.
Recycle the components after they are disassembled:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u
according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
29670-000-55 / 29670-000-57 Rev.04 03-80-975-00 10/23
Check/Remedy
● Check screw fittings and tighten if necessary.
● Check screw fitting between speaker and boom and
● tighten if necessary.