Publicidad
Idiomas disponibles
Idiomas disponibles
12. The selected forecast sensitivity setting will now flash (0.09 inHg default).
13. Press and release the "+"or "-" button to select 0.06, 0.09, or 0.12 inHg (if hPa is
selected, the choices will be 2, 3, or 4). A lower setting will result in a quicker change in
the forecast icon. In other words, if the setting is 0.06 inHg, the forecast icon will change
if the air pressure changes by at least 0.06 inHg within a six-hour period. This is useful,
as certain areas will have a change of air pressure but no change in weather.
14. Press and release the " SET " button to advance to the storm warning setting.
15. The selected storm warning level will now flash (0.15 inHg, 5 hPa default).
16. Press and release the "+"or "-" button to select the storm warning setting. This can be
set to 0.09, 0.12, 0.15, 0.18, 0.21, 0.24, or 0.27 inHg (from 3 to 9 hPa). This setting will
determine how much of a drop in air pressure over six hours will sound the storm
warning alarm.
17. Press and release the " SET " button to advance to the storm warning alarm on/off
setting.
18. The storm warning on or off setting will now flash (AOFF default/factory setting).
19. Press and release the "+"or "-" button to select whether or not the storm warning alarm
is activated.
20. Press and release the " SET " button to advance to the LCD setting (skip steps 1 and 2
in section F if continuing).
G. LCD Contrast
1. Press and hold the " SET " button for 1 second.
2. Press and release the " SET " button 17 times.
3. The LCD contrast setting will now flash (4 is the default/factory setting).
4. Press and release the "+"or "-" button to select the contrast level desired (from 1 to 8).
5. Press and release the " SET " button to advance to the LI setting.
6. The LI setting will now flash (ON is the default/factory setting).
7. Press and release the "+"or "-" button to select ON or OFF.
8. Press and release the " SET " button to exit the programming mode.
Note : The LI setting does not affect the function of the indoor weather station and is
present only for future use.
FEATURES AND OPERATIONS
A. Sunrise/set and Moonrise/set Calculation
The indoor weather station will calculate the sunrise/set moonrise/set each day based on the
location entered through the programming mode. To view another location and/or date without
affecting the programmed city location and date, follow section A.2 in Features and Operations.
1. Daylight Hours and Minutes Calculation
Press and release the "SUN/MOON" button. In place of the sunrise/sunset time will be the
number of daylight hours and minutes. Press the "SUN/MOON" button to view the sunrise/
sunset time again.
2. View Different Location/Time for Sunrise/set and Moonrise/set
If no buttons are pressed in 30 seconds during this selection the indoor weather station will
revert to the normal mode. Alternatively, you may press the "CH" key to revert to the
normal mode.
a. Press and hold the " SUN/MOON " key for at least two seconds.
b. The selected country will now flash.
c. Press and release the "+" or "-" key to select the desired country.
d. Press and release the " SET " key to advance to the state selection (or city if Canada or
Mexico is selected skip to step h.).
e. The state is now flashing.
GB
P.12
f.
Press and release the "+" or "-" key to select the state (see listing on pages 8 to 11).
g. Press and release the " SET " key to advance to the city selection.
h. The city is now flashing.
i.
Press and release the "+" or "-" key to select the city.
j.
Press and release the " SET " key to advance to the date setting.
If the sunrise/set moonrise/set times are desired for the current date, the "SUN/MOON"
key may be pressed to calculate. Skip to step t for further explanation.
k. The year is now flashing (the current year).
l.
Press and release the "+" or "-" key to select the year desired.
m. Press and release the " SET " key to advance to the month setting.
n. The month is now flashing (the current month).
o. Press and release the "+" or "-" key to select the month desired.
p. Press and release the " SET " key to advance to the date setting.
q. The date is now flashing (the current date).
r. Press and release the "+" or "-" key to select the date desired.
s. Press and release the " SUN/MOON " key to calculate the new city location at the date
selected.
You may instead press the "SET" key to select a different location, starting at step b above.
t.
Once the "SUN/MOON" key is pressed, the sunrise/set and moonrise/set times will
flash as dashes while the indoor weather station calculates the times (the moon phase
is calculated, also). Once the times are displayed, the indoor weather station will remain
in this mode for 30 seconds or until the " CH " key is pressed. The year, month, or date
will also be flashing. At this time it is possible to start at step b. to select another date or
location.
u. Once this mode is exited either through timeout after 30 seconds or by pressing the
" CH " button, the indoor weather station will revert to the normal mode with the location
and date set through the programming mode. The indoor weather station will default to
the last city selected when this mode is entered again.
B. Moon Phase
1. There are 12 moon phases shown on the indoor weather station; the black portion signifies
the portion of the moon visible in the sky. Thus, when the moon icon is all black, it is a full
moon. The indoor weather station is programmed with all moon phases from the year
2000 until 2099.
Waxing Crescent
New Moon
First Ouarter
Full Moon
Last Ouarter
Waning Gibbous
2. The moon phase for any date may be found by selecting a different date through the sun
rise/set moon rise/set programming section (section A in Features and Operations).
Waxing Gibbous
Waning Crescent
GB
P.13
Publicidad
