5. MAIN COMPONENTS
1st stage: inline 5-micron PP filter:
Can effectively remove filter rust, sand, other larger particles and solid
impurities in water.
2nd stage: inline GAC filter:
Can effectively adsorb chlorine, humus, disinfection, by products, odors,
colors, and other materials.
3rd stage: inline CTO filter:
Can further effectively remove filter rust, sand, other larger particles and
solid impurities in water. Can effectively adsorb chlorine, humus,
disinfection, by products, odors, colors, and other materials.
4th stage: RO membrane:
Aperture is 0.0001 micron (0,1 nm), can effectively remove bacteria,
viruses, heavy metals, pesticide residues, and other harmful substances
from the water.
5th stage: T33 post carbon filter:
Regulates water taste, keep water fresh.
Optional 6th stage post filter: Alkaline filter, infrared mineralization activated
carbon filter, alkaline sterilization filter, sterilizing filter.
6. OTHER ACCESSORIES AND FUNCTIONS
Boost pump: Boost pressure to create a stable environment for the RO
membrane.
Low pressure switch: to prevent pump idling. When the inlet water
pressure is les than 0.03 MPa or when the inlet water stops, the low voltage
switch automatically shuts off the power source so the machine stops.
High pressure switch: prevents pump from fully turning. When the
pressure tank is full or has reached the set pressure, power supply is
automatically cut off to stop the machine.
Check valve: controls to the Flow direction.
Flow restrictor: control the ratio of pure and waste water.
7. TECHNICAL PARAMETERS
Suitable water pressure: 0,05 MPa – 0,35 MPa.
Operation pressure: -< 0,85 MPa.
Inlet temperature: 5-38oC.
Maximum inlet Water TDS Value: -<1000ppm.
Maximum daily water production volume: 75 gallons, approximately 284
liters.
Electric shock protection type: Type II.
Suitable water quality: Municipal tap water meeting the GB5749-2006
standards.
Av. de Velázquez s/n
(Cruce Aeropuerto) 29004 Málaga
www.baezaonline.com
Atención al cliente 951 91 91 21