ANSMANN 1700-0174 Manual De Operación página 7

or being dropped, even from low heights. Handle
the product carefully! Do not continue to use a
damaged device. RISK OF EXPLOSION! Dispose of
the Powerstation in accordance with instructions.
• Do not expose to potentially explosive environ-
ments where there are flammable liquids, dusts or
gases.
• The product may only be used in closed, dry
and spacious rooms, away from combustible
materials and liquids. Disregard can result in burns
and fires.
• Operate the product only within its power limits as
cited in the technical data.
• Protect the product from moisture, overheating
and dirt. Use it only in dry environments.
• Never expose the product to extreme conditions,
such as extreme heat/cold, fire, direct solar radia-
tion, etc.
• Do not use while still in the packaging.
• Carry out cleaning tasks only when the mains plug
has been pulled out / when the power supply has
been disconnected.
• Clean only with a slightly damp cloth, then rub
it dry. Do not use hard brushes or sharp objects,
abrasive cleaners or solvents.
circle-c GENERAL INFORMATION
• Do not throw or drop
• Do not open or modify the product! Repair work shall only be carried out by the ma-
nufacturer or by a service technician appointed by the manufacturer or by a similarly
qualified person.
TECHNICAL DATA
Compatible with 12 V automotive batteries
Jump-start output current:
Peak output current:
Cable length:
Housing dimensions:
Weight:
Operating ambient temperature:
Storage temperature:
Protection class:
Protection functions:
INSTRUCTIONS FOR USING THE JUMPSTART CABLE
• Connect the blue plug to the Powerstation's "JUMPER CABLE" output. Ensure that
the plug is fully inserted. The LED indicator on the cable will not be active. Place the
500 A max.
1000 A max.
approx. 50 cm
100 × 40 × 40mm
260 g
-20°C 55°C
-20°C to 55°C
III
Short-circuit protection, over-discharge
protection, overcurrent protection, plug over-
temperature protection, reverse polarity
protection, reverse charging protection
7