Horizon Fitness EX-59 Manual Del Propietário página 7

ASSEMBLY STEP 7
CONSOLE MAST
WATER
BOTTLE
HOLDER
CONSOLE MAST BOOT
SCREW (W)
12
EX-59-CE5.2-OM-rev1.2.indd 12-13
HARDWARE BAG 7 CONTENTS :
SCREW (W)
SCREWS (W)
12 mm
Qty: 3
TOP CAP
Open hardware bag 7.
A
Slide top cap over console mast and
B
snap into place.
Insert console mast boot over top cap
C
and snap into place.
Slide water bottle holder over
D
console mast and attach using 3
screws (w).
ASSEMBLY STEP 8
CONSOLE
CONSOLE CABLES
UPPER HANDLEBAR
BOLTS (X)
CONSOLE MAST
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
NOTE: Be careful not
to pinch any wires while
attaching the console.
HARDWARE BAG 8 CONTENTS :
BOLT (X)
10 mm
Qty: 4
A Open hardware bag 8.
B Attach the CoNSoLE CABLES to the CoNSoLE.
C Carefully tuck the CoNSoLE CABLES into the
CoNSoLE MAST before attaching the CoNSoLE.
Attach CoNSoLE to CoNSoLE MAST using 4
BoLTS (X).
D Slide UPPER HANDLEBARS onto LoWER
HANDLEBARS making sure handlebars are
joined together completely. Secure UPPER
HANDLEBARS to LoWER HANDLEBARS using
PRE-ATTACHED SET SCREWS.
Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
E Repeat step D on the opposite side of the elliptical.
YOU ARE FINISHED!
7/6/10 4:33 PM
13