Publicidad
Idiomas disponibles
Idiomas disponibles
5. LISTEN TO BLUETOOTH
An external device with Bluetooth Connectivity like a smartphone or tablet be wirelessly connected to this
Turntable using the Bluetooth function.
1.
Turn on the unit by pressing the STANDBY/VOLUME Knob or standby key at remote control
2.
Press the MODE key at the front panel or remote control to select Bluetooth mode, the display would
show "Bluetooth".
3.
The system would go to Bluetooth pairing mode, the display would show "Connecting"
4.
The first time you use your Bluetooth device with the system, you will need to pair them together.
5.
Turn your external device's Bluetooth Setting ON. Wait a moment, then look for the Bluetooth pairing
name "Lenco MC-160". If your device asks for a password (depending on the device manufacturers,
model, and software version), then enter digits "0000" and press OK.
6.
Select the Bluetooth pairing name, to connect the unit. Once connected, the Display would show
"Connected".
7.
You are now connected to your external device via Bluetooth
8.
Rotate the Standby/Volume Knob to adjust the sound level and adjust the volume control at your external
audio device.
9.
Rotate the Functional Knob at the front panel or press |<</>>| keys at the remote control to select
previous/next songs.
10. Press the Functional Knob at the front panel or >||/ENTER key at the remote control to pause/play the
songs.
11. Long press the Functional Knob at the front panel or >||/ENTER key at the remote control to disconnect
the Bluetooth connection for other device connect, you can also short press again to re-connect the last
device.
"This product has a bluetooth reception function, you can not transmit any bluetooth sound with it: this
means that you can receive wirelessly a bluetooth sound signal from an external source like a smartphone."
6.
USB OPERATING
Listen to USB
The system can play MP3 songs file by below steps:
1.
Turn on the unit by pressing the STANDBY/VOLUME Knob or standby key at remote control
2.
Press the MODE key at the front panel or remote control to select USB mode, the display would
show "USB".
3.
Connect the USB flash stick (FAT32, up to 32GB) into the USB jack at the front panel, the display would
show "reading..."
4.
The system would start playback automatically
5.
Press the Functional Knob at the front panel or >||/ENTER key at the remote control to Pause/Play the
song playback.
6.
Rotate the Functional Knob at the front panel or |<</>>| keys at the remote control to select
previous/next songs.
7.
Long press the Functional Knob at the front panel or >||/ENTER key at the remote control to stop the
song playback. You can also use the STOP key at the remote control to do that.
Recording to USB
The system can record the audio from DAB/FM/AUX/Phono mode to the USB flash stick by below steps:
1.
Turn on the unit by pressing the STANDBY/VOLUME Knob or standby key at remote control.
2.
Press the MODE key at the front panel or remote control to select DAB, FM, Aux or Phono mode.
3.
Start the playback (refer to corresponding mode section)
4.
Connect the USB flash stick (FAT32 up to 32GB) into the USB jack at the front panel.
Publicidad
