Lotus ILMOS80 Manual De Instrucciones página 4

I
ENGLISH INSTRUCTION MANUAL
A) DISPLAYS AND BUTTONS
Hour hand
Chronograph
hour hand
Small Second hand or Chronograph 1/20 second hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
D)USING THE ALARM
Pull button "C". Alarm sounds when the hour hand aligns with the alarm time indicator.
<Setting the alarm time>
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the alarm time indicator to the desired set time.
3. Return the crown to normal position.
4. Return the crown to normal position.
5. The alarm will sound when the hour hand aligns with the alarm time indicator.
<Switching the alarm ON and OFF>
Button "C" pulled out to the 1st position : ALARM ON
Button "C" returned to the normal position : ALARM OFF
<Turning off the alarm>
Pressing button "C" to return it to the normal position turns the alarm off when the alarm is sounding.
<Length of sounding time of alarm>
The alarm sounds for 15seconds, then stops sounding for 2minutes and 45seconds.
This cycle is repeated by several times.
Chronograph
minute hand
Button C
ILM0S80
Chronograph
second hand
Button A
Minute hand
1st position
2nd position
Normal crown position
Calendar
Button B
Alarm hand