Nacon REVOLUTION 5 PRO Guía De Inicio página 46

EN /
I How to charge your Revolution 5 pro controller
1. The Revolution 5 pro controller contains a Lithium Ion battery.
2. To charge the battery connect the USB-A to USB-C cable to your PS5
console or PC and then to the controller. For the fastest charge time, make sure your
controller is powered OFF. If you wish to use the controller and charge at the same
time, then the battery will `trickle' charge and the charge time will be extended.
3. To check the battery level in PS5
back of the controller twice. The White LEDs below the touch pad will light up. There
are 5x LEDs and they indicate the level as follows:
5x LEDs = 100–80%
4x LEDs = 80–60%
3x LEDs = 60–40%
2x LEDs = 40–20%
1 x LED = 20–10%
NOTE: When the battery level is below 10%, the 1x LED will start to flash.
You need to immediately charge the battery.
To check the battery level in PS5
dongle, then go to the PS5
bottom left of your TV/Monitor screen.
To check the battery level, in PS4 mode or PC mode, tap the back of the controller
twice. The White LEDs below the touch pad, will light up. There are 5x LEDs and they
indicate the capacity as follows:
5x LEDs = 100–80%
4x LEDs = 80–60%
3x LEDs = 60–40%
2x LEDs = 40–20%
1x LED = 20–10%
NOTE: When the battery level is below 10%, the 1x LED will start to flash. You need to
immediately charge the battery.
REMARK: Battery life is influenced by the features you have activated and the games
you are playing. The more features you have activated, the quicker your battery life will
be used.
To optimize play time, you can use the Revolution 5 Pro App to disable certain features
such as LEDs and vibration.
*PC compatibility (Windows 10/11) neither tested nor approved by Sony Interactive Entertainment.
mode when you are connected via the cable, tap the
®
mode when you are connected via the USB
®
on-screen menu and you will see the battery level in the
®
console, PS4
® TM