Publicidad
10
MD DECK (MD-H100)
LINE LINE DIGITAL
REMOTE
IN
OUT
IN
CONTROL
Va
. Elen
U
S)
&) PLAY
(oo)
BPE
ESAS
RO UN
aa
epee
ca een
LINE
LINE
REMOTE
IN|
OUT
CONTROL
CASSETTE DECK (R-H100)
i |
FM 76
__ 6x0 AM
oe
L_|
|
(OPTICAL)
DIGITAL
OUT
i
ECR
eae
cae gre
How to connect external sources.
© Turn off the power of all the equipment
before making connections.
@ Read instructions of each component you
intend to use with the CR-H130.
(Al PLAY/REC jacks
@ Make sure to connect:
white
white
white
white
L C@mmmemee (7)
=m
> omeemmommg») |,
mm
= i
mmamenen) ) R
;
red
© Be sure to insert each plug securely. To
prevent hum and noise, do not bundle the
connection cords with the power cord or
speaker cord.
REMOTE CONTROL jacks
If you have TEAC R-H100 or MD-H100,
convenient system control operations and
Al direct play functions are possible;
@ By pressing the POWER button of CR-
H130, you can switch ON/standby all the
unit connected by remote control cords.
@ When you press the PLAY button(>) of
R-H100 or MD-H100 , the input selector of
the CR-H130 is set to "TAPE" or "MD"
automatically.
@ When you select "TAPE" or "MD" with the
input selector of the CR-H130, the tape or
MD will be played automatically.
@ When you turn on the system, the source
that was selected last time will start
playback automatically.
Connect the REMOTE CONTROL jack(A or
B) to the REMOTE CONTROL jack(A or B)
of R-H100 or MD-H100 by a remote control
connection cord.
(C} DIGITAL OUT terminal
Use this terminal to connect to DIGITAL IN
terminal of a digital component (such as a
MD deck, digital amplifier, or DAT deck).
@ Connect the component through the
DIGITAL IN terminal with an optical cable.
@ When making a digital connection, remove
the caps from the terminals. When you
don't use the terminals, leave the caps in
place.
ENGLISH
Publicidad
