Publicidad
Idiomas disponibles
Idiomas disponibles
Enclosure Configuration
Adding or Removing Roof Panel
WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those explicitly described and approved by
Tripp Lite. Do not attempt to add or remove the roof panel without assistance.
Removing Roof Panel
1
Pull the 2 pins near the rear of the roof panel. While holding the pins, push the roof panel
upward.
2
Remove the roof panel tabs
3
Lift the roof panel from the enclosure.
To Reinstall Roof Panel, Reverse Steps 1-3.
Adding or Removing Side Panels
Removing Side Panel
1
Open the latch by sliding it downward.
2
Tilt the top of the panel away from the enclosure.
A
from the roof panel attachment slots
1
B
in the enclosure frame.
2
3
1
2
8
1
2
A
B
Publicidad
