MTD 450 Serie Manual Del Operador página 9

Figure 3=9
Figure 3=10
f
/
/
9. a. Align the chipperchute overthe weldstuds, sothe
slot in the bottomof the chuteis facing down.
b. Securechipperchute with the threecupped
washers(cuppedsideagainstthe chipperchute)
and hexnuts previouslyremoved.Tightenthe nuts
at this time.See Figure3-9.
Attaching The Bag
10.Toattachthe bag:
a. Placethe openingof the bag completely over the
chute deflector.
b. Pullon the drawstringuntilthe bag is tight around
chute deflectoropening.
c. Clipdrawstringback on itself,tight againstchute
deflectorto secureintoposition.See Figure3-10.
Setting Up
Your Chippe
Shredder
MPORTANT
This unit iSshipped
without gaso ine or
oilin the enginelBe
Certain to service
engine with gasoline
and Oil a s instrUCted
the separate engine
manual before operati
ing your machine:
NOTE: All references
this manual tothe
left or right side of
the chipper shredder
is from the operating
position only. Excepi
tions, if any. will be
specified:
NOTE: This OPerators
ManUal covers a range
of product specifiCa,
tions for Various
models: CharacteriStics
and features discussed
and/or iilustrated in this
manual may not be ap.
plicable to all models:
MTD LLC reservesthe
right to Changeproduct
specifications; designs
and equipment without
notice and w thout
incurr ng Obligationl
9