Descargar Imprimir esta página

Rowenta Silence Force Extreme RO57 Serie Manual De Instrucciones página 9

Ocultar thumbs Ver también para Silence Force Extreme RO57 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
TROUBLESHOOTING
IMPORT NT:
your vacuum cleaning is not working as
well as it should be and before carrying out
any checks, switch it off using the On/ Off
button.
If your vacuum cleaner won't start
• The appliance doesn't have any power: check
that the appliance is correctly plugged in.
If your vacuum cleaner doesn't have any suction
power
• n accessory or the flexible hose is blocked:
unblock the accessory or the flexible hose.
• The cover won't close properly: check the
positioning of the bag, bag support and HEP filter
cassette and close the cover.
If your vacuum cleaner has less suction power,
makes noise, whistles
• n accessory or the flexible hose is partially
blocked: unblock the accessory or the flexible
hose.
• The bag is full or saturated with fine dust: replace
the Wonderbag bag (18).
• The filtration system is saturated: change the
HEP filter cassette (ref. ZR0029) and put it back
into its housing.
• The mechanical power control switch (20 c* or
20Bc*) is open: close the power nozzle adjustable
manual power switch.
* ccording to model: these systems are specific to certain
models or are accessories available as an option.
s soon as you notice that
If the change bag light stays on Red
• The bag is saturated: replace the Wonderbag
bag (18).
If the cover won't close (presence sensors 13, 14,
16)
• Check that that the bag support is fitted as well
as the bag and that it is positioned correctly.
• Check that the HEP filter cassette is fitted or that
it is correctly positioned.
If the nozzle is difficult to move
• Reduce the power by opening the power nozzle
adjustable manual power switch (20 c* or 20Bc*)
or by moving the electronic power control (9) to
the MIN position.
If the power cord does not rewind completely
• The power cord is slowed down when
rewinding: pull the power cord out again and
press the power cord rewind button.
If a problem persists, take your vacuum cleaner to
your local Rowenta Approved Service Centre.
6

Publicidad

loading