EN
24
SAFETY INSTRUCTIONS
•
Children must not use the appliance! Mentally, sensory and physically
impaired persons may only use the device if they have been informed in detail
about the functions and safety precautions by a supervisor responsible for
them beforehand and understand the associated risks.
•
Check the voltage on the product label before use. Ensure that you only connect
the appliance to sockets with the appropriate voltage.
•
Do not use the device with a damaged power cord. If the power cord is
damaged, it must be replaced by the manufacturer, an authorised specialist
company or a similarly qualifi ed person.
•
Switch off the device after each use and pull the plug out of the socket.
•
Before cleaning, remove the plug from the socket and allow the device to cool
down completely.
•
Place the device securely in the centre of the work surface.
•
Do not let the cable hang over the edge of the work surface.
•
Do not switch on the appliance when the tank is empty.
•
Do not place the device near gas stoves, electric stoves or ovens.
•
Make sure that the plug and power cord do not get wet in case the unit leaks.
•
The appliance is intended for use in the home and similar environments only.
It is not intended for commercial use. These include kitchens in offi ces, farms,
hotels, motels and establishments offering bed & breakfast.
•
Do not leave the device unattended during operation.
•
Do not remove the lid while the contents are boiling.
•
When removing the lid, hold it so that the steam fl ows away from you.
•
Do not move the device while there is liquid in it.
•
To ensure that the liquid does not overfl ow, do not overfi ll the device.
•
If the power cord is damaged, it must be replaced by the manufacturer, an
authorised specialist company or a similarly qualifi ed person.
•
Make sure that children do not play with the device.
•
Do not place the unit near water or in damp rooms.
•
Do not clean the device with a high-pressure cleaner and do not immerse the
device in water.
CAUTION
Risk of burns! Parts of the unit can become very hot during use. Do
not touch the surfaces during use.