Klarstein BRAUHELD PRO Serie Manual De Instrucciones página 32

EN
32
OTHER FUNCTIONS
Note: In one step mode, if you want to change the setting of any step
(temperature/power/time) during operation, press the TEMP/POWER or TIME
button once and press the (+/-) button to change.
If the boiling temperature does not match the
temperature displayed in the thermometer, hold down
the (+/-) buttons simultaneously for 3 seconds and
correct the displayed temperature by up to +/- 10 °C.
To do this, press the (+/-) button. Then wait 5 seconds
to save the selected value. You can also correct the
temperature before commissioning the machine. Once
corrected, it is saved and you do not have to correct
it the next time, unless the temperature is inaccurate
again.