Descargar Imprimir esta página

TruVision M Serie Guia De Instalacion página 6

Ocultar thumbs Ver también para M Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
EN
Installation environment
When installing your product, consider these factors:
Electrical: Install electrical wiring carefully. It should be done by
qualifi ed service personnel. Always use a proper PoE switch or a
12 VDC UL-listed Class 2 or CE-certifi ed power supply to power
the camera. Do not overload the power cord or adapter.
Ventilation: Ensure that the location planned for the installation of
the camera is well-ventilated.
Temperature: Do not operate the camera beyond the specifi ed
temperature, humidity, or power source ratings. The operating
temperature of the camera with heater is between -30 to +60°C.
Humidity is below 95%.
Servicing: Do not attempt to service this camera yourself. Any
attempt to dismantle or remove the covers from this product will
invalidate the warranty and may also result in serious injury. Refer
all servicing to qualifi ed service personnel.
Cleaning: Do not touch the lens with your fi ngers. If cleaning
is necessary, use a clean cloth with some ethanol and wipe the
camera gently.
Unpacking
Check the package and contents for visible damage. If any
components are damaged or missing, do not attempt to use the unit;
contact the supplier immediately. If the unit is returned, it must be
shipped back in its original packaging.
Before starting the installation
Do not touch the lens by hand as the image may blur.
Do not power up the camera until the installation is completed.
Installing the camera
See pages 2 to 5.
To prevent injury, the camera must be securely attached to the ceiling/
wall in accordance with the installation instructions. The ceiling or wall
must be strong enough to be able to withstand more than eight times
the weight of the camera and its accessories.
Ensure that the power is disconnected before you wire, install, or
disassemble the camera.
Local storage
Insert a Micro SD card with up to 256GB to use the camera as an
additional recording device, or as a backup in case of failure of
communication with the network video recorder. The card is not
supplied with the camera. Recorded video and log fi les can be
accessed via the web browser or via TruVision Navigator.
Setting up the camera
Once the camera is mounted, set up its network and streaming
parameters so that it can be controlled over the network, and program
it as appropriate for its location. Refer to the camera's confi guration
manual for further information, which is available on our website.
6
Technical specifi cations
Electrical
Voltage input
Power consumption
Miscellaneous
Operating temperature
Relative humidity
IP rating
Dimensions
Weight
Legal information
© 2023 Carrier. All rights reserved. Information is subject to change
without prior notice.
TruVision names and logos are a product brand of Aritech, a part of
Carrier. Other trade names used in this document may be trademarks
or registered trademarks of the manufacturers or vendors of the
respective products.
While every precaution has been taken during the preparation of this
manual to ensure the accuracy of its contents, Carrier assumes no
responsibility for errors or omissions.
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation, Inc.
13995 Pasteur Blvd, Palm Beach Gardens, FL 33418, USA.
Authorized EU manufacturing representative:
Carrier Fire & Security B.V.,
Kelvinstraat 7, 6003 DH Weert, Netherlands.
Product documentation
Please scan the QR code to download the electronic version of
the product documentation. The manuals are available in several
languages.
12 VDC, PoE
TVFC-M0 -0401-TUR-G:
12 VDC, 0.55 A, max. 6.6 W
PoE: 802.3af, 36 to 57 V, 0.22 to
0.13 A, max. 7.6 W
TVFC-M01-0402-TUR-G:
12 VDC ±25%, 0.54 A, max. 6.5 W
PoE: 802.3af, Class 3, 36 to 57 V,
0.22 to 0.14 A, max. 8 W
TVFC-M01-0802-TUR-G:
12 VDC ± 25%, 0.63 A, max. 8.5 W
PoE: 802.3af, Class 3, 36 to 57 V,
0.24 to 0.15 A
-30 to +60 °C
95% or less non-condensing
IP67
TVFC-M01-0401-TUR-G:
Ø138.3 × 125.2 mm
TVFC-M01-0402-TUR-G:
Ø138.3 × 115.4 mm
TVFC-M01-0802-TUR-G:
Ø138.3 × 120.1 mm
TVFC-M01-0401-TUR-G:
Approx. 750 g
TVFC-M01-0402-TUR-G:
Approx. 760 g
TVFC-M01-0802-TUR-G:
Approx. 900 g

Publicidad

loading

Productos relacionados para TruVision M Serie

Este manual también es adecuado para:

Tvfc-m01-0401-tur-gTvfc-m01-0402-tur-gTvfc-m01-0802-tur-g