Publicidad
Idiomas disponibles
Idiomas disponibles
25
Home
Technical background
The philosophy behind NeuLog's plug and play
technology is based on each sensor's ability to store its
own data due to an internal flash memory chip and
micro-controller in each plastic NeuLog body. This is also
true for the Panda Multi-sensor. This technology allows
the multi-sensor to collect and then store the digital data
o
o
in the correct scientific units (for example:
C,
F, Lux, %).
The multi-sensor is pre-calibrated at the factory. The
built-in software in the logger can be upgraded for free
at any time using provided firmware update.
The
viewer's
screen
uses
resistive
touchscreen
technology which reacts to a pressure being applied to
the screen – opposed to the more common capacitive
screen which requires an electrical conductor to
operate. This allows for students to operate the screen
even while wearing gloves.
Temperature:
Inside the Panda device is a thermistor which is a
variable
resistor
that
varies
significantly
with
temperature. The resistance increases nonlinearly with a
decreasing temperature. During calibration, the sensor's
internal controller creates the conversion formula from
resistance to temperature.
V2018.01
English
Publicidad
