NeuLog PANDA-1 Guia Del Usuario página 32

Using Panda with WiFi
Materials needed:
 NeuLog Panda multi-sensor
 WIFI-201 or WIFI-202 WiFi Module
Your Panda Multi-sensor needs to be connected to a
WiFi module. The WiFi module will create a closed
NeuLog WiFi network which will stream the NeuLog data
to the device of your choosing (tablet, smartphone, or
computer). Once your device is wirelessly connected to
the NeuLog network, you can run experiments and
collect data through a browser of your choosing.
Procedure (follow these steps in this exact order):
1. The WiFi module should be off at this point (not
connected to anything).
2. Take you panda and press on the settings icon (on
the right side of the Panda screen).
3. Press on WiFi mode.
4. Connect the Panda multi-sensor directly to the WiFi
module (no wires required).
5. Although not required, we recommend plugging the
Panda to an outlet using a USB to mini USB charger
(such as a typical cell phone charger).
V2018.01
32
Home
English