NeuLog PANDA-1 Guia Del Usuario página 33

6. The WiFi module indicator lights will flash; take no
action until the LED to the far left turns blue; this can
take up to one minute.
7. Take your tablet or smart phone, go to the WiFi
settings
(NeuLog0184 for example) which matches the ID
found on the back of the WiFi module (0184 for the
example).
8. Give your device about 20 seconds to connect to the
WiFi module.
9. Once the device is connected, go to your browser
and type the website panda201.com into the URL
bar, then wait for 30-60 seconds.
10. The Panda multi-sensor will give a live reading and
you can begin experimentation.
V2018.01
and select
33
the NeuLog
Home
network
English