Medela Waterless Milk Warmer Instrucciones De Uso página 14

4.
Expand liner prior to installing in
warmer.
5.
Bend insert at the hinge and place into
position. Securely install insert using
the tabs located on the back and front
of the warmer cavity.
T
Tip: Warmer will not operate if insert is
not installed correctly.
6. Evenly spread liner within warmer
cavity.
Note: For good air flow and accurate
warming, insert should be spread out
against the inner walls of the warmer.
7.
Place tray, flat-side down,
into bottom of warmer.
Note: Always use tray when
warming syringes or bottles.
Warming or Thawing in a Container
WARNING
Always feel container/syringe & check milk
Acceptable milk containers
• Bottles up to 250 mL (plastic or glass)
Maximum height 162 mm
• Syringes up to 60 mL (plastic)
12
temperature prior to feeding.
Hinge
Hinge
Tray
4
5
6
7