1. PRECAUTIONS
This guide is an integral part of the appliance. Keep these
instructions with you during use of your warming drawer.
Read these instructions before installing and using the
appliance. Installation should be performed by qualified
GB
personnel only, in conformity with current law. This
appliance is intended for domestic use only in conformity
with current EEC directives. The manufacturer will not
be held liable in the event of a failure to follow THESE
WARNINGS AND SAFETY INSTRUCTIONS. KEEP
THESE INSTRUCTIONS WITH THE APPLIANCE. IF
THE APPLIANCE SHOULD BE GIVEN TO ANOTHER
PERSON MAKE SURE THESE INSTRUCTIONS ARE
SUPPLIED WITH IT.
DO NOT USE THE APPLIANCE FOR HEATING
PURPOSES. HIGHLY FLAMMABLE OBJECTS ARE
AT RISK OF CATCHING FIRE IF PLACED IN THEIR
PROXIMITY DUE TO ELEVATED TEMPERATURES.
DO
NOT
DISPOSE
HOME.
SORT THE
CLASSIFICATION
PROPERLY.
THE LABELS DISPLAYED ON THIS APPLICATION
ARE IN COMPLIANCE WITH THE DIRECTIVE 2002/96/
CEE WASTE AND ELECTRICAL EQUIPMENT (WEE).
DO NOT OBSTRUCT THE OPENINGS AND FIXTURES
INTENDED FOR HEAT CIRCULATION.
THE LABELS LOCATED ON THE APPLIANCE WHICH
SHOW THE SERIAL NUMBER AND MODEL ARE
FOUND ON THE HEATING BLOCK. NEVER REMOVE
THE DATA LABEL.
WARNING! NEVER USE SHARP METAL OBJECTS OR
ABRASIVE SCRUBBING PADS THAT COULD CAUSE
DAMAGE TO THE SURFACE OF THE APPLIANCE.
IF NECESSARY, USE STANDARD NON-ABRASIVE
UTENSILS MADE OF WOOD OR PLASTIC.
2. INSTRUCTIONS FOR RECYCLING -
PROTECTION OF THE ENVIRONMENT
Our products are made solely from non-polluting
materials that do not harm the environment and are
recyclable. We ask for your effort and collaboration in
disposing of the packaging in a proper manner. Contact
the product retailer or local organizations for further
information on recycling. Dispose of the packaging
properly. Parts of the package especially plastic, pose
a risk for children.
Your old appliance must also be disposed of properly.
OF
MATERIALS
IN
VARIOUS
MATERIALS
AND
DISPOSE
OF
Important: consign the appliance to the proper local
organization authorized to collect broken appliances.
Proper and intelligent disposal consists of recovering
materials of value.
Remove the plugs or electrical cords of appliances that
are no longer being used so that they no longer pose a
threat to children.
3. SAFETY INSTRUCTIONS
The safety measures regarding the electric, gas and
functions are found in the installation section. It is in
your best interest and safety and also legally required
that all electrical appliances be installed and repaired
exclusively
by
with current standards. Our qualified personnel can
guarantee that the works will be performed correctly. Gas
and electric appliances must always be disconnected by
experienced personnel. Before connecting appliances
to electric circuits it is important to check and compare
THE
the connection data
BY
on the label to the characteristics of the local electric
THEM
line. It is essential that this data coincide in order to
avoid damaging the appliances. For further help and
assistance please contact your local electrician.
The electrical safety of the appliance is only guaranteed
when attached to a ground conductor. The manufacturer
will not be liable for damages caused by the absence or
interruption of a ground conductor (i.e. electric shock).
The appliance must be installed and connected by a
specialized electrician. If necessary, contact a local
electrician who is familiar with local standards and
regulations. The manufacturer will not be liable for
damages caused by incorrect installation or installations
not conforming to local and national laws.
WARNING! IN ORDER TO AVOID THE RISK OF
ELECTRICAL SHOCK ONLY USE APPLIANCES THAT
HAVE BEEN INSTALLED CORRECTLY.
WARNING! NEVER OPEN THE HOUSING OF THE
APPLIANCE. IF YOU COME INTO CONTACT WITH
PARTS UNDER PRESSURE OR IF THE ELECTRICAL
AND/OR
MECHANICAL
MODIFIED, THIS COULD DAMAGE THE APPLIANCE
AND CAUSE IT TO MALFUNCTION.
WARNING! DO NOT KEEP PLASTIC CONTAINERS
OR ANY FLAMMABLE OBJECTS IN THE APPLIANCE.
SUCH OBJECTS POSE A RISK OF CATCHING FIRE
ONCE THE WARMING DRAWER IS TURNED ON.
18
qualified
personnel
in
(voltage and frequency) shown
STRUCTURES
conformity
ARE