Publicidad
Idiomas disponibles
Idiomas disponibles
TO INSTALL
MOWER
Be sure tractor
is on level surface
and
engage
parking
brake.
1.
Lower
attachment
lift lever to its lowest
position.
A CAUTION:
Lift lever is spring
loaded.
Have a tight grip on lift lever, lower
it
slowly
and engage
in lowest
position.
2.
Turn steering
wheel
to the left as far as
it will go and position
mower
on right
side of tractor
with deflector
shield
to
the right.
Pivot bar towards
you and insert
other end of bar into hole in rear
mower
bracket
(D). Move
mower
as
needed
to insert
bar.
Secure
with washer
and retainer
spring
as shown.
5.
ATTACH
MOWER
SIDE SUSPENSION
ARMS
(A) TO CHASSIS
- Position
hole
in arm over pin (B) on outside
of tractor
chassis
and secure
with washer
and
retainer
spring.
6.
Repeat
on opposite
side of tractor.
NOTE: Be sure mower side suspension
arms (A) are pointing forward before slid-
ing mower under tractor.
3. Slide mower under tractor until it is
centered under tractor.
4. FIRST INSTALL ANTI-SWAY
BAR (S).
From right side of mower, insert ant-
sway bar into hole in transmission
bracket (T).
7. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position
slot in link assembly over pin on rear
mower bracket (D) and secure with
washer and retainer spring.
8. Repeat on opposite side of tractor.
22
Publicidad
