Daub D/ Cross Slicer 202 Manual De Usuario página 45

5. INSTALLATION
5.1. Safety instructions
WARNING
6
Carefully read the safety instructions in section 3. before installing the machine. This will prevent
possible personal injury or damage to the machine.
5.2. Put the table in the operating position.
5.2.1. Required tools
• Spanner 17 mm
5.2.2. Instructions
Figure Tilting the table to the operating position
q
1. Turn the bolts on the table anticlockwise to loosen them. See figure 10.
2. Tilt the table up to the operating position.
3. Turn the bolts on the table clockwise to tighten them.
D\ Cross Slicer 202 | User manual
2
1
45
www.daub.nl